Science // Matter & Materials
Matter Is Made of Particles
Develop a model to describe that matter is made of particles too small to be seen, and that this explains properties of solids, liquids, and gases
Quick check
Can the learner explain that everything is made of tiny particles we can't see, and that how tightly packed they are determines whether something is a solid, liquid, or gas?
Ask this to see whether the topic is secure.
Topic // Mastery
What mastery looks like
- Describe matter as made of particles too small to see with the naked eye
- Use a particle model to explain differences: particles tightly packed (solid), loosely arranged (liquid), spread far apart (gas)
- Use the particle model to explain a state change (e.g. heating makes particles move faster and spread apart)
Topic // Map
Where this fits
- RequiredMust come first
- HelpfulHelps, but not essential
Before this
3 topics- Heating & Cooling ChangesRequired
Matter & Materials // Ages 7 to 9
Must observe state changes before explaining them with particle model
- Drawing Particle DiagramsRequired
Matter & Materials // Ages 7 to 11
Developing a model of matter as particles too small to see is built on the particle diagram representation
- Solids, Liquids & GasesRequired
Matter & Materials // Ages 8 to 9
Must understand observable states of matter before modelling them with particles
You are here
Matter Is Made of Particles
Ages 10 to 11 // Concept
Leads to
2 topics- The Particle ModelRequired
Matter & Materials // Ages 11 to 12
KS3 particle model extends US KS2 introduction to matter as particles too small to see
- Conservation of MassHelpful
Matter & Materials // Ages 10 to 11
Particle model supports understanding why mass is conserved (particles aren't destroyed)
Topic // Research-informed
Teaching notes
From the Marble Skill Taxonomy. These notes have not been validated in classrooms, so treat them as a starting point for your own judgement.
The approach
Introduce the particle model of matter (ages 10–11) as an inference justified by what it explains, not asserted as fact. Learners run three tell-tale phenomena — compressing a sealed gas syringe, mixing liquids (e.g. 50 ml water + 50 ml alcohol) to a total volume a little less than the sum of the parts, and a spreading smell — then zoom from each visible event down to a particle-level picture that accounts for it. The teaching objective is the observation→model move: because we cannot see particles, the model earns belief by explaining why a gas squashes, why some mixtures end up with less volume than the parts added together, and why scents spread. Keep it qualitative (no kinetic-energy numbers). Guard two cardinal errors: individual particles do not carry the material's bulk properties, and the space between particles is empty, not filled with air or other material.
Common misconceptions
- Individual particles carry the material's properties (a particle of ice is cold/hard).
- The space between particles is filled with air or something, not empty.
- Matter is continuous, not particulate ('it's solid all the way through').
- A dissolved or evaporated substance stops existing because you can't see it.
- Gas has no particles / no mass because it's invisible.
Useful representations
- A macro/particle zoom toggle (object → the particles it's made of)
- A gas syringe showing empty gaps closing on compression
- A dissolving glass where sugar particles tuck into water's gaps (no volume rise)
- A diffusion scene showing particles drifting and mixing
Teaching practices
- Introduce the model through phenomena it EXPLAINS (compressing a gas, dissolving with no volume rise, a spreading smell), so it is inferred from evidence, not asserted.
- Make the observation→model move explicit: we can't see particles, but they account for what we do see.
- Keep it qualitative at this stage — no kinetic-energy numbers; reserve quantitative kinetic theory for KS3.
- Explicitly guard against particles having macroscopic properties and against 'air' filling the gaps.
- Use a macro-to-particle zoom so the invisible scale is felt concretely.
Activities to try
- 1
Why we believe in particles: a three-phenomenon bench
Why it works: We accept invisible particles because one idea — tiny, moving particles with empty space between them — explains three otherwise puzzling observations (compressibility, a mixed volume less than the sum of the parts, diffusion). The model is inferred from evidence, not seen.
- Push a sealed gas syringe with a blocked nozzle and notice it compresses surprisingly far; predict first whether and why it should squash.
- Then examine (or toggle to) a particle view: the plunger moves because widely-spaced particles close the empty gaps between them.
- Mix 50 ml water with 50 ml alcohol (e.g. methylated spirit handled by an adult) in a measuring cylinder, or dissolve salt in a measured volume of water, and observe that the combined volume is a little less than the expected total; predict the final level and WHY beforehand.
- Zoom to the particle view: smaller particles tuck into the spaces between larger particles, so less volume is added than expected.
- Release a scent in one corner and track how long it takes to reach the far side, noting that in a real room draughts and air currents also help carry it; zoom in to see the scent particles moving, drifting and mixing among the air particles. For a slower view without draughts, watch a drop of food colouring spread in still water.
- 2
Zoom into a block: feeling the too-small-to-see scale
Why it works: All matter — including a solid metal bar and invisible gas — is made of enormous numbers of particles far too small to see; the three states differ in how those particles are arranged and spaced.
- Start from an everyday object — a block of metal, a cup of water, or a sealed jar that contains air — and use a tap-to-reveal or zoom to move from the whole object down to the particles it is made of; note that the air, though unseen, is also made of particles.
- For each state, read a short flap explaining the arrangement: particles packed closely in a regular pattern, vibrating in fixed positions (solid); still close together but irregularly arranged and able to slide past each other (liquid); spread far apart and moving freely in all directions (gas).
- Describe aloud roughly how much smaller than the object a single particle is, to register that particles are too small to see.
- 3
Do properties belong to one particle or to the many? (predict, then explain, with probes)
Why it works: Properties like colour, hardness and state are bulk properties that emerge from how huge numbers of particles are arranged and held together — they are not stamped on each individual particle. The gaps between particles are empty, not filled with air or more material.
- Consider a single particle of copper on its own: predict whether it is orange, hard and shiny like the whole bar, and explain WHY before any reveal.
- Answer the probing questions: What is in the space between two copper particles? Is a single water particle wet and runny? If the bar were ice instead, is one ice particle cold?
- State where the bar's colour, hardness and state actually come from if not from each particle.
Topic // Standards
Curriculum standards
- Next Generation Science Standards (NGSS) K-5
- 5-PS1-1
Science // Matter & Materials
More in Matter & Materials
- Irreversible ChangesAges 9 to 11ConceptExplain that some changes result in the formation of new materials and are not usually reversible, such as burning, rusting, and reactions with acid
- Advanced Material PropertiesAges 9 to 11ConceptCompare and group everyday materials based on advanced properties: hardness, solubility, transparency, electrical and thermal conductivity, and response to…
- Material Properties VocabularyAges 9 to 11LanguageUse technical vocabulary to describe and compare material properties — conductor, insulator, thermal, electrical, transparent, opaque, translucent, soluble…
- Dissolving & SolutionsAges 9 to 10ConceptUnderstand that some materials dissolve in liquid to form a solution, and describe how to recover a substance from a solution by evaporation
- Reversible ChangesAges 9 to 10ConceptDemonstrate that dissolving, mixing, and changes of state are reversible changes where no new materials are formed
- Separating MixturesAges 9 to 10MethodUse knowledge of solids, liquids, and gases to decide how mixtures might be separated through filtering, sieving, and evaporating
- Atoms, Elements & CompoundsAges 11 to 12ConceptExplain the differences between atoms, elements, and compounds; describe the simple Bohr model of the atom (nucleus with protons and neutrons, electrons in…
- The Periodic TableAges 11 to 12ConceptDescribe the organisation of the periodic table into periods and groups, explain the contribution of Mendeleev, and use the table to identify metals…